{"id":4944,"date":"2022-06-15T19:32:00","date_gmt":"2022-06-15T23:32:00","guid":{"rendered":"https:\/\/brooklynfixedgear.com\/?p=4944"},"modified":"2024-02-05T22:41:46","modified_gmt":"2024-02-06T03:41:46","slug":"what-is-a-master-link-on-a-bike","status":"publish","type":"post","link":"https:\/\/brooklynfixedgear.com\/maintenance-and-repairs\/what-is-a-master-link-on-a-bike\/","title":{"rendered":"What Is a Bike Chain Master Link Rivet? (And How To Find It)"},"content":{"rendered":"\n

Your chain is the driving force behind your bike. It converts the power generated by your pedaling into gears that propel your bike forward. Unfortunately, it’s also one of the most overlooked parts of a bike. Road filth, mud, and salt spray wear down the chain, while age causes it to slacken. As a result, you’ll sometimes want to remove or replace it. To do this, you will need to find the maser rivet, but what is a master link rivet and how do you use it to remove a bike chain? <\/strong><\/p>\n\n\n\n

To remove your bicycle chain, look for the master link or master chain link rivet. The master rivet allows you to open your chain without using a chain tool. The rivet will have a spring clip that looks like a horseshoe on the side or special easy-release pins. To remove your master chain link rivet:<\/strong><\/p>\n\n\n\n

    \n
  1. Use a pair of needle-nose pliers to pull off the piece that looks like a horseshoe.<\/strong><\/li>\n\n\n\n
  2. Pull off the side plate of the link and slip the chain apart.<\/strong><\/li>\n\n\n\n
  3. Bend the chain where the master rivet is as if trying to form the link into a U shape. This will loosen the side plate. <\/strong><\/li>\n<\/ol>\n\n\n\n

    But there’s a lot more to it than that. So, in this article, you will learn what a master link is, what it is used for, and how to remove it so you can do proper maintenance on your fixed gear or any other type of bike.<\/p>\n\n\n\n

    Editor’s note: This article was updated on June 15, 2022<\/strong>, to include additional information regarding bike maintenance.<\/em><\/p>\n\n\n\n

    Before getting into how to remove a master link, let’s first understand what a bike chain master link is in the first place.<\/p>\n\n\n\n

    What is a bike chain’s master link?<\/h2>\n\n\n\n

    The master link, also known as a fast link or link rivet, is a pair of two outer plates, with each plate resembling the outer plate of a chain. If you don’t have a chain tool<\/a>, a quick-release master link enables you to join or detach a chain. It also serves as a set of the chain’s outer plates, connecting two sets of inner links.<\/p>\n\n\n\n

    Because a quick link may or may not be reusable, when you disconnect a chain to replace it, you may end up discarding the old master link.<\/p>\n\n\n\n

    There are two kinds of master links.<\/strong> The first kind is a straight-chain line-compatible link, often seen on single-speed and hub-geared bikes. The other is a derailleur-compatible external link<\/a>.<\/p>\n\n\n\n

    \"Red
    Red fixed hear bike with black drop bars.<\/figcaption><\/figure>\n\n\n\n

    What is the master link on a bike chain for?<\/h2>\n\n\n\n

    A master link makes it simple to connect and unhook your bike chain. There are specialist tools that make disconnecting a master link<\/strong> even simpler. If you don’t have one, check out the ones below. <\/p>\n\n\n\n[azonpress template=”grid” asin=”B0179JC31I,B00D9NW32I,B07P4CCJYH”]\n\n\n\n

    Do all bikes have master rivets?<\/h2>\n\n\n\n

    Master links are not present on all bikes<\/strong>. They are often seen on single-speed or three-speed bikes with internal gears or on BMX bikes. If you’re uncertain whether you have a master link, just measure the distance between your connecting plates. If it’s at least 1\/8 inch, your chain should have a master link.<\/p>\n\n\n\n

    How to identify and find the master link<\/h2>\n\n\n\n

    To find the master link, first, mount your bike on a bike work stand. If you don’t have a work stand, turn the bike over and rest it on the handlebars and saddle. Next, stand on the drivetrain side of your bike to look down on the chain. Turn the pedals<\/a> slowly to rotate the chain as you watch each link go by. You’ll notice a link that’s wider than the others<\/strong>. Your main link is the widest one.<\/p>\n\n\n\n

    How to unlock the master link rivet by hand<\/h2>\n\n\n\n

    To unlink the master link by hand, follow these easy steps:<\/strong><\/p>\n\n\n\n

      \n
    1. Find the rivet. The rivet will either have a spring clip that looks like a horseshoe on the side or special easy-release pins. <\/li>\n\n\n\n
    2. Use a set of needle-nose pliers and pull off the piece that looks like a horseshoe. <\/li>\n\n\n\n
    3. Pull off the side plate of the link and slip the chain apart. <\/li>\n\n\n\n
    4. Bend the chain where the master rivet is as if trying to form the link into a U shape. This will loosen the side plate. <\/li>\n\n\n\n
    5. Finally, pull off the plate and take the chain apart.<\/li>\n<\/ol>\n\n\n\n

      How to remove a chain with a chain tool<\/h2>\n\n\n\n

      If you can’t find the master link on your bike or have a chain without this master link, use a chain tool to open your chain<\/strong>.<\/p>\n\n\n\n

        \n
      1. Before using the tool, slip your chain off the gears to keep the chain from snapping when the tension is released. <\/li>\n\n\n\n
      2. Position the chain tool<\/a> over any link so the rod of the chain tool is lined up with a pin on the link. <\/li>\n\n\n\n
      3. Finally, turn the lever on the chain tool to push the rod forward until the pin pops out. <\/li>\n\n\n\n
      4. The chain is now open and ready for cleaning or replacing.<\/li>\n<\/ol>\n\n\n\n

        Below are a few tools to help your remove your chain.<\/p>\n\n\n\n

        Are you looking for more advice? Watch this video called “How to Remove a Power Linkor Quick Link for Bike”<\/em> from the Zachary Kenney YouTube Channel.<\/p>\n\n\n\n

        \n